HomeReseller BenefitsReseller ToolsReseller SolutionsInternational RatesProductsHelpReseller LoginLearn More
Clique aqui para visitor nosso site em Português Contact Us Español
World Leader in Turn-Key VoIP Solutions VarPhonex helps you start your own VoIP Business for just $199
Help

 

Welcome
Common Topics
Knowledgebase
Configuration Guides
Glossary
Contact Us

 


Learn More

Grandstream HandyTone 286

This is an ATA adaptor with a single ethernet interface and one POTS line enabling you to use a traditional phone or fax machine as a SIP enabled IP device. This means that you will need an open ethernet port on your local network. It is fairly simple to setup and almost identical to the BudgeTone 100 configuration. The default configuration will get an IP address via DHCP. The full manual can be found on Grandstream's Website.


STEP 1
You must first determine the IP address of the device.  There are two ways of doing this depending on the firmware version installed on the device.  If option 1 does not work, try option 2.

  1. Plug a POTS phone into the RJ11 connector, lift the handset and press the red button. Dial '02'. You will be told the IP address of your device (e.g. 192.168.0.100).

  2. Plug a POTS phone into the RJ11 connector, lift the handset and press the * (asterisk) button 4-5 times until the menu says “IP ADDRESS”.  The current IP address will then be repeated back to you.



STEP 2
Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.


STEP 3
You will be prompted to enter a password, the default is "admin", then click the "Login" button.


STEP 4
You need to modify only a few parameters from the factory default. They are listed here:


SIP Server:
sip.varphonex.com

SIP User ID:
Enter the phone number you chose when you signed up for VarPhonex service.

Authenticate ID:
Enter the phone number you chose when you signed up for VarPhonex service.

Authenticate Password:
Enter the password that you chose when you signed up for VarPhonex service.

Name:
Enter your full name. This will show up as part of your callerid.



SIP Registration: Yes



NAT Traversal: No


TFTP Server:
Change IP to 168.75.215.189


1. Set "Enable Call Feature" to "yes"

2. Then pick up the telephone that is connected to the HT486, upon hearing the dial-tone press *92.


Send DTMF: via SIP INFO



STEP 5
Click on the "Update" button at the bottom of the form.



STEP 6
You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".


STEP 7
Click on the "Reboot" button at the bottom of the form.


STEP 8
Make calls!

   Copyright 2003 - 2014 VarPhonex.com WebPhone  |  SIP Termination  |  SIP Trunking  |  Join Now  |  Learn More  |  Site Map
Custom Solutions  |  Blog   |   Careers   |  About VarPhonex   |  News  |  e911  |  Legal

VarPhonex offers the industry leading VoIP Reseller Program.  We let you sell VoIP in your brand name including Internet phone service, SIP termination, SIP Trunking, International DID numbers and unlimited VoIP plans.  We also offer prepaid phone service using our voice over IP system and an analog telephone adapter, softphone, PBX, Asterisk, Trixbox or other VoIP device which can use a SIP Trunk.  VarPhonex white label VoIP solutions are designed so you can private label our home phone service, business phone service, call shops service and phone service for cyber cafes.  VarPhonex is proud to support Internet telephony equipment including Sipura, Linksys, Cisco, Digium, Grandstream and more.  We offer low cost A to Z rates and provide International VoIP termination along with DID phone numbers for private label resale.
Partner Solutions | About Us | Custom Shopping Cart | Support | Reseller Login | Request Pricing | IP Phones and Devices
Free Phone
| Internet Telephony Devices | Calling Plans | Web Phone | Pay as you go calling | VoIP Phone Card | RingByName